Linear Home Security Photoelectic Smoke Detector TSD-90A
(TSD-90A)
The Model TGB-96 Supervised Pattern Recognition Technology Glass Break Detector is a glass break detector with a built-in transmitter
designed for use with Linear's SX Format receivers. When breaking glass is detected, the transmitter sends a digitally coded signal to its
companion receiver/control.
Coding switches are not required or used in the T-90. Each transmitter is pre-coded at the factory to a
unique code. With the SX format, there are more than sixteen million codes possible. The TGB-96 can send three different signals: alarm, low
battery and status.
The unit is powered by two 3-volt lithium batteries. These batteries will last for approximately two and one half
years under normal climatic conditions. If the battery voltage drops below a preset level, a low battery signal is sent with every alarm or
test transmission.
General Specifications
- Dimensions: 4.25 in W x 3.13 in H x 1.70 in D (108 x 80 x 43 mm)
- Mounting: screws or double sided tape (supplied)
- Power: two 3V DL2450 lithium batteries (supplied)
- Battery Life: up to 3 years
- Operating Temperature: 32° to 122° F (0° - 50° C)
- Frequency: 303.875 MHz (North America)
433.92 MHz (international)
- Number of Codes: 16,777,216
- Code Setting Method: factory programmed
- Glass Detection Range: 20 ft radius typical, 25 ft max
- Glass Detection Method: pattern recognition technology
Features
- Dual-technology detection device
- Full RF supervision
- Includes T-90D transmitter board
- Powered from one battery set
- Alarm, supervisory, and low battery transmissions
- Lithium battery powered
- Test, operate LED
- Shatter pro pattern recognition technology
- SX format
Compatible Receivers
- Linear 64-Channel, 8-Zone Multifunction Field Selectable Receiver
SXR-64
Related Products :
Garage Door > Linear Security Systems > Detectors & Accessories
|
|
 Email a Friend
Product Inquiry
|
Home Sellers Yield High Returns Investing in Curb Appeal
